Ready To Run Super Nitro RS4 kits!
Did anyone say "Go BIG"? The Super Nitro RS4 is HPI's largest
sedan-style car kit. Each one is 20% larger than other 1/10 scale sedan
kits, making them easier to drive and much larger on the track! These huge
radio control Nitro cars measure over 20 inches (50cm) long, 10
inches (22cm) wide and over five inches (13cm) tall!
Now it's easier than ever to get "Super Fever" - RTR Super Nitro RS4 kits
are now available! Professionally assembled by our expert staff, each
RTR kit is also equipped with our newly updated Nitro Star 15FE engine
with a brand new purple anodized cooling head and our trusty TX-2 radio
set from Airtronics!
The Super Nitro RS4 kits also include a complete set of 22
ball bearings and a countersunk purple anodized aluminum chassis. The
efficient belt drive provides smooth power to all four wheels. Each of the
three drive belts has its own tensioner for easy adjustment.
 |
 |
| The upgraded 15FE engine provides all the
power you'll need |
A purple anodized countersunk aluminum
chassis is standard |
The new and improved Nitro Star 15FE engine is a great way
to get introduced to the world of Nitro R/C - it's easy to tune with just a
single adjustment, powerful and fast! The Nitro Star 15FE has been upgraded
since its introduction to make it the easiest to tune and most powerful
stock engine around! With the inclusion of a purple anodized heat sink head
it's also now the best-looking engine, too! The heat sink head provides
better cooling for more fuel efficiency and overal power.
The larger stance of the Super Nitro RS4 gives it extra
stability over standard 1/10 scale Touring Cars. The Super Nitro RS4 is also
a full-time 4WD car, which means easy driving and control on any paved
surface! Double wishbone suspension makes tuning a breeze and provides a
durable suspension. Turnbuckles make it easy and simple for racers to tune
the suspension to their race track. A turnbuckle wrench is included with the
kit so adjustments are quick and easy.
 |
 |
| The huge front bumper deflects impacts
and bumps |
The entire suspension is fully adjustable
for race tuning |
Our Super-size Racing Slick tires ride on large Super-size
wheels which offer great performance and awesome scale looks! The Super
Nitro RS4 kits accept standard-size radio gear, so no special equipment is
needed to run them. An easily removable radio tray makes cleaning the car
very easy. Just take off the radio tray and spray the car down with our
Nitro Car Cleaner (#9062) for quick and easy cleaning!
 |
 |
| 22 ball bearings and gear brace are
standard equipment |
A 75cc fuel tank provides long run times
for lots of fun |
The wheelbase is adjustable so other available "Super Size"
bodies (from other companies) fit the Super Nitro RS4. The wheelbase can be
changed from 280mm to 300mm very easily.
The big look of the Super Nitro RS4 kits is going to get all
the attention at any parking lot track!
Do
you want to see the size comparison between a standard sedan-size car and
the Super Nitro RS4?
The Super Nitro RS4 Features List:
- Includes a powerful .15 size Nitro Star engine with
purple cooling head
- Complete set of 22 ball bearings
- 4WD for high grip on any paved surface
- Countersunk purple anodized aluminum chassis
- Upgradeable with many hop-up parts
- Includes a large Super-size body
- Window paint masking included for body
- Flexible vinyl decal sheets with lights, grilles, logos
and more details
- Oil-filled coil over shocks
- Super Nitro Super Star or Mesh Wheels
- Super-size Racing Slick racing tires
- Adjustable wheelbase to fit other "Super Size" bodies on
the market
- HPI Nitro Star engines come with a 2 year limited
warranty. Read our
Nitro Star Engine Warranty.
Great radio!
The HPI TX-2 radio system included with HPI RTR kits is packed with
features! The super narrowband AM transmitter and receiver work together to
let you precisely control your car. Six different crystal choices let you
race with your friends!
The radio transmitter is comfortable to hold and features a battery
strength indicater, letting you know when the batteries need to be replaced
or charged. The transmitter also features a retractable antenna, steering
and throttle trim dials (for fine adjustments to center the servos), plus a
dual rate adjustment for the steering! Dual rate is very important because
it lets you adjust how far the steering servo turns the front wheels left
and right.
Two strong servos are also installed in each HPI RTR Nitro kit, already
plugged into the standard size super narrowband AM receiver. A convenient
on/off switch is also included!
If a warranty issue is ever encountered, Airtronics handles all USA
returns and repairs. Upgrades are also available from your local hobby shop!
Four AA batteries are needed to fit in the car battery holder, with 8 AA
batteries needed for the transmitter.
To order
this car, please click HERE
Specifications Sheet
| |
without body |
with body (measurements will vary depending
on the body installed) |
|
| Length |
435mm or 17" |
490mm or 20" |
|
| Weight |
1470g or 3.2 lbs |
1600g or 3.5 lbs |
(no electronics) |
| Weight, RTR |
1690g or 3.7 lbs |
1800g or 4 lbs |
(with electronics, approximate) |
| Ride Height |
13mm or 1/2" |
5mm or 3/16" |
(measured from ground to bottom of chassis
or body, approximate) |
| Front Track |
193mm or 7 9/16" |
|
(measured at center of tire) |
| Front Width |
225mm or 8 7/8" |
228mm or 9" |
(measured at outside of tire) |
| Rear Track |
193mm or 7 9/16" |
|
(measured at center of tire) |
| Rear Width |
225mm or 8 7/8" |
230mm or 9" |
(measured at outside of tire) |
| Wheelbase |
280mm or 11 1/16" |
(short wheelbase, measured at
center of axle) |
| |
300mm or 11 7/8" |
(long wheelbase, measured at center
of axle) |
| Fr. Shock Length |
53.5 |
(measured from center of shock pivots) |
| Fr. Shock Stroke |
45 to 56mm |
|
| Rr. Shock Length |
53.5mm |
(measured from center of shock pivots) |
| Rr. Shock Stroke |
45 to 56mm |
|
| Front Wheels |
2.2" (57mm) x 35mm wheels with
12mm hex adapter, high impact nylon |
|
| Rear Wheels |
2.2" (57mm) x 35mm wheels with
12mm hex adapter, high impact nylon |
|
| Front Tires |
57mm inner diameter (ID) M
Compound Racing Slick tires |
|
| Rear Tires |
57mm inner diameter (ID) M
Compound Racing Slick tires |
|
| Front Caster |
10 degrees, adjustable to 8
degrees |
|
| Camber/Front Toe |
Adjustable turnbuckles |
|
| Rear Toe |
2 degrees toe-in |
|
| Gear Ratio |
2.16 (39T diff pulley, 18T
gear shaft pulleys) |
|
| Gear Ratio |
44T spur and 13T clutchbell,
single speed |
|
| Differential Type |
Enclosed Metal Bevel Gear |
|
| Chassis Type |
Purple anodized aluminum,
countersunk |
To order
this car, please click HERE
To
Micro Macro Mundo click HERE
